|
Jacks with their 3 modes of use;
- as shown: first Jack lifts by the spine
- second Jack lifts from under the furniture
- third Jack lifts from under furniture, protecting electrical
conduit.
- Each Jack can be used individually to complete the task .
For a limited special price of $780
 
Traditionally, there have been two options for office installation and
reconfiguration of office systems: partial or total structure disassembly, or
bulky, expensive lifting systems. Now, there is a better way!
Key Benefits
- No hydraulic systems to ruin office flooring.
- No fees to become Certified Carpet Installer.
- Flexibility in the choice of carpet tiles suppliers.
- Reconfiguration of office systems is painless and
cost less in labor.
- Lightweight and priced to sell.
Key Features
- Adjusts to different interconnect slot heights
- Aluminum and steel construction- lightweight, corrosion resistant, and
durable
- Simple and efficient design--reduces physical effort--improves
your bottom line
- One push locking lifter raises panel 7/8"--saves time
- Maximum lift without locking 1-1/4"
- Built in safety catch
- Portable
- Made in the USA
Operation Instructions
The Furniture Lift System can be used in three modes of operations:
1. The Jack by itself via the spine on the panels.
2. The Jack with the Universal Lift Bracket to lift from
underneath the panels.
3. The Jack with the Universal Lift Bracket and the
special U-adapter to lift from underneath the panels with electrical conduit.
Mode1--Using the Jack alone
Using a one-push lift and lock mechanism, the Panel Lift maintains a secure
panel height, all in three steps:
- Loosen the locking knob on the main Jack's shaft.
- Insert the lip retainer into an interconnect slot on the panel frame
while making sure that the Jack's base is flat on the ground
-Tighten the locking knob.
- Grasp the Furniture Lift's lever firmly with one hand and push the lever
down. Your panel is lifted to a
1-1/4" and when released is automatically
locked at a height of 7/8".
Conversion is simple:
- Slide the Aluminum Ring Guide that is part of the Universal Lift Bracket
over the pin on the base of the Jack. Attach the Jack's lever to the
existing slot on the channel ( there are two slots on the channel, choose
the one that corresponds with the needed height).
- Insert the horizontal portion of the "L" shape of the Universal Bracket underneath the
horizontal bottom bar of the modular panel and lift. Please note
that the Jack's lip retainer may need adjustment in height via the locking
knob on the base of the Jack- Please refer to Mode 1 of use of Jack.
- For panels with electrical conduit underneath, please use the provided
U-shape adapter.
Panel Shim
When there is no room to remove the carpet under the panel system the Panel Shim
plays a big role in reducing the Jack's usage time. Panel Shims are made
of hard plastic, which will not deform under the load and are completely
resistant to the natural elements. When inserted beneath the panel foot and
on top of the newly laid carpet tile, it allows the installer to move from point to
point with the Panel Jack.
Staggered height construction (1/2", 3/4", and 1") allows the panel to rest
at a choice of three floor to foot spacing.
To replace old carpet:
- Lift and shim underneath every supporting foot.
- Remove old carpet or carpet tiles off all clear areas.
- Use the Universal Bracket to lift the furniture while resting the Jack
on the newly laid carpet as close as possible to the old carpet tile
underneath the foot. Remove the old carpet tile and replace it
with the new carpet tile. Put the staggered shim beneath the
foot and
atop the newly tiled area.
- Repeat above steps till finished tiling the rest of old tiles under feet.
- Lift and remove all shims
Call and order the ultimate universal lifting system
today.
(888)718-9899
You Get:
- Two (2) Panel Jacks
- One (1) Universal Lift Brackets
- Twenty (20) Panel Shims
- One (1) adapter for panels with conduits underneath
Additional shims can be purchased separately at $5.00
each.
We reserve the right to alter & modify technical specifications
& design without further notice!
| 
Quality
Contract
Manufacturing,
Inc.
